Dell Networking N3048 48-Port Gigabit Ethernet Switch (10G SFP+ Ports, Dual 200W AC)
$399.00
Out of stock
SKU
NETWORKING-DELL-N3048
Dell Networking N3048
Switch & Standard Traffic-Port Attributes:
|
Chassis:
|
Dell Networking N3000 series Technical Specifications
Physical | |
2 rear stacking ports (21Gbps) supporting up to 84Gbps (fullduplex) 2 integrated front 10GbE SFP+ dedicated ports USB (Type A) port for configuration via USB flash drive Auto-negotiation for speed and flow control Auto MDI/MDIX, port mirroring Flow-based port mirroring Broadcast storm control Energy-Efficient Ethernet per port settings Redundant variable speed fans Air flow: I/O to power supply RJ45 console/management port with RS232 signaling (RJ-45 to female DB-9 connector cable included) Dual firmware images on-board |
|
Chassis | |
Size (1RU): 1.7 in x 17 in x 16 in (43.5 mm x 434.0 mm x 407.0 mm) (H x W x D) Approximate weight: 15.2119lbs/6.9kg (N3048P) ReadyRails rack mounting system, no tools required |
|
Environmental | |
Power supply efficiency: 80% or better in all operating modes Max. thermal output (BTU/hr): 151.4 (N3024), 204.6 (N3024F), 4,467.1 (N3024P), 220.97 (N3048), 3,113.33 (N3048P) Power consumption max (watts): 52.8 (N3024), 67.1 (N3024F), 1,287 (N3024P), 74.8 (N3048), 2,145 (N3048P) Operating temperature: 32° to 122°F (0° to 50°C) Operating humidity: 95% Storage temperature: –40° to 149°F (–40° to 65°C) Storage relative humidity: 85% |
|
Power Cords | |
125V, 15A, 10 feet, NEMA 5-15/C13 250V, 12A, 2 meters, C13/C14 Country- and region-specific power cord options available |
|
Power Supplies (optional) | |
200W AC hot swappable with V-Lock, adds redundancy to non-PoE
switches:
N3024, N3024F and N3048 only |
|
Optics (optional) | |
Transceiver, SFP, 100BASE-FX, 1310nm wavelength, up to 2km reach Transceiver, SFP, 1000BASE-T Transceiver, SFP, 1000BASE-SX, 850nm wavelength, up to 550m reach Transceiver, SFP, 1000BASE-LX, 1310nm wavelength, up to 10km reach Transceiver, SFP, 1000BASE-ZX, 1550nm wavelength, up to 80km reach Transceiver, SFP+, 10GbE, LRM, 1310nm wavelength, up to 220m reach Transceiver, SFP+, 10GbE, SR, 850nm wavelength, up to 300m reach Transceiver, SFP+, 10GbE, LR, 1310nm wavelength, up to 10km reach Transceiver, SFP+, 10GbE, ER, 1550nm wavelength, up to 40km reach |
|
Cables (optional) | |
Stacking cable 0.5m, 1m and 3m Dell Networking, cable, SFP+ to SFP+, 10GbE, copper twinax direct attach cable, 0.5m, 1m, 3m, 5m and 7m |
|
Performance | |
MAC addresses: 16,384 Static routes: 1,024 (IPv4)/1,024 (IPv6) Dynamic routes: 8,160 (IPv4)/4,096 (IPv6) Switch fabric capacity : 212Gbps (N3024, N3024F and N3024P) (full duplex) 260Gbps (N3048 and N3048P) Forwarding rate: 158Mpps (N3024, N3024F and N3024P) 193Mpps (N3048 and N3048P) Link aggregation: 128 LAG groups, 144 dynamic ports per stack, 8 member ports per LAG Priority queues per port: 8 Line-rate Layer 2 switching: All (non-blocking) Line-rate Layer 3 routing: All (non-blocking) Flash memory: 256MB Packet buffer memory: 4MB CPU memory: 1GB RIP routing interfaces: 512 VLAN routing interfaces: 128 VLANs supported: 4,094 Protocol-based VLANs: Supported ARP entries: 6,144 NDP entries: 400 Access control lists (ACL): Supported MAC and IP-based ACLs: Supported Time-controlled ACLs: Supported Max number of ACLs: 100 Max ACL rules system-wide: 4,096 Max rules per ACL: 1,023 Max ACL rules per interface (IPv4) : 3,072 (ingress), 1,024 (egress) Max ACL rules per interface (IPv6) : 1,021 (ingress), 512 (egress) Max VLAN interfaces with ACLs applied: 24 |
|
IEEE compliance | |
802.1AB LLDP Dell Voice VLAN Dell ISDP (inter-operates with devices running CDP) 802.1D Bridging, Spanning Tree 802.1p Ethernet Priority (User Provisioning and Mapping) Dell Adjustable WRR and Strict Queue Scheduling 802.1Q VLAN Tagging, Double VLAN Tagging, GVRP 802.1S Multiple Spanning Tree (MSTP) 802.1v Protocol-based VLANs 802.1W Rapid Spanning Tree (RSTP) Dell RSTP-Per VLAN (compatible with Cisco's RPVST+, Available starting with Dell Networking OS 6.1 release) Dell Spanning tree optional features: STP root guard, BPDU guard, BPDU filtering 802.1X Network Access Control, Auto VLAN 802.2 Logical Link Control 802.3 10BASE-T 802.3ab Gigabit Ethernet (1000BASE-T) 802.3ac Frame Extensions for VLAN Tagging 802.3ad Link Aggregation with LACP 802.3ae 10 Gigabit Ethernet (10GBASE-X) 802.3AX LAG Load Balancing Dell Multi-Chassis LAG (MLAG) Dell Policy Based Forwarding 802.3az Energy Efficient Ethernet (EEE) 802.3u Fast Ethernet (100BASE-TX) on Management Ports 802.3x Flow Control 802.3z Gigabit Ethernet (1000BASE-X) ANSI LLDP-MED (TIA-1057) Dell EqualLogic iSCSI Auto-configuration MTU 9,216 bytes |
|
RFC compliance and additional features | |
|
Write Your Own Review